Featured Image: The Most Spruce
Is getting more accurate and precise cuts in your woodworking projects a challenge for you? Don’t worry; all you need is the best track saw.
Track saws are well-known for their precision and simplicity of use. They also enable you to customize the saw to suit your specific cutting requirements.
Choosing the best track saw for DIYers and pros may be difficult, particularly if you are making your first purchase.
This list includes the finest track saws so that you can make an informed decision.
Makita SP6000J1 6-1/2″ Plunge Circular Saw Kit, with Stackable Tool case and 55″ Guide Rail 12 AMP motor with variable speed control dial (2,000 – 5,200 RPM) for optimum performance in a variety of materialsLarge cutting capacity (2-3/16″ at 90° and 1-9/16″ at 45°)Bevel capability (-1 to 48°) with positive stops at 22.5° and 45°Close to the wall cutting (11/16″) for expanded cutting applicationsIdeal for cutting large wood panels and other wood materials in confined areasCheck Price Below
Buy on Amazon>
2.>
DEWALT FLEXVOLT 60V MAX Circular Saw, 6-1/2-Inch, Cordless TrackSaw Kit (DCS520T1) Zero clearance TrackSaw(TM) cutting system delivers straight, splinter-free, precise cutsFor use with TrackSaw(TM) dual edged tracks for perfectly straight cutsContinuous Anti-Kickback mechanism and riving knife prevent kickback when engagedStraight plunge mechanism for optimal ergonomicsEnclosed low profile guard gives a 90% dust extraction capabilityCheck Price Below
Buy on Amazon>
3.>
BOSCH Tools Track Saw – GKT13-225L 6-1/2 In. Precison Saw with Plunge Action & Carrying Case Track saw with plunge action – provides fast, easy setup for one-step clean finish cuts in wood and wood-based sheet goods such as laminated particle boards and plywoodPlunge mechanism – allows for precise plunge cuts with accurate depth of cutSingle bevel pivot point – when sawing using a track (sold separately), the track can be positioned in the same way for bevel cuts or non-bevel cutsConstant electronics – helps maintain speed under the load of more-demanding applicationsOverload protection – protect the motor from overheatingCheck Price Below
Buy on Amazon>
4.>
Festool Model TS 55 REQ Plunge Cut Saw with T-Loc and Rail Max. cutting depth2.165 inCheck Price Below
Buy on Amazon>
5.>
Kreg ACS2000 Adaptive Cutting System Saw + Guide Track Kit POWERFUL: Cuts plywood, solid wood boards and other sheet goodsEFFECTIVE: Delivers straight, splinter-free cuts up to 50″ longUSEFUL: Cuts up to 2 1/8″ deep at 90° and 1 1/2″ at 45°SAFE: Built-in safety features protect against binding and kickbackVERSATILE: Can be used alone or with Project Table KitCheck Price Below
Buy on Amazon>
6.>
DEWALT DWS520CK 6-1/2-Inch 12-AMP TrackSaw Kit with 59-Inch and 102-Inch Track Zero clearance track saw cutting system delivers precise, straight, splinter-free cutsFor use with track saw dual-edged tracks for perfectly straight cuts in both directionsOn-track cut depth: 2-1/8 (54-milimeter) at 90 degree , 1-5/8-inch (41-milimeter) at 45 degree ; depth scale accurately indicates exact depth of cut accounting for track thickness.12A, 1300W motor effortlessly powers through hard woods up to 2-1/8-inch thick.Continuous Anti-Kickback mechanism and riving knife prevent kickback when engaged; Low profile blade guard allows saw to be used in confined spaces.Check Price Below
Buy on Amazon>
7.>Sale
WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cutsCreate 45-degree bevel cuts in boards up to 1-5/8 inches thickPerfect for ripping boards or for performing internal plunge cutsIncludes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arborCompatible with the WEN CT9502 100-Inch Track and the WEN CT992F Track Saw ClampsCheck Price Below
Buy on Amazon>
1. Makita SP6000J1 6-1/2″ Plunge Track Saw Kit
Pros:
Variable speed control for optimum cutting speed The guiding rail is secure in its positionOperator comfort is aided by the soft-start function
Cons:
Cutting plywoods thicker than one inch is difficultThe tool is covered by a one-year guarantee, but not the track
Sebring Tip:
Makita, like Festool and all the rest, has a reputation for creating one of the best track saws, and their SP6000J1 saw kit model is no exception. It’s optional, but the 55-inch guide rail system is made of durable anodized aluminum.
It also features an electronic variable speed control motor with a maximum speed of 12 amps. You may keep the optimum speed for a smooth, accurate cut at 2,000 or 5,200 rpm.
2. DEWALT DCS520ST1 6-1/2″ Track Saw Kit
Pros:
There will be no chipping or harsh cuttingLong-lasting batteryIt’s simple to replace a bladeDust collection is adequate (around 60 percent)
Cons:
The instructions are a little vagueA quick cut may burn
Sebring Tip:
A spring-loaded riving knife and an anti-kickback system minimize kickback, and the straight plunge mechanism makes it simpler to operate.
It can cut 2-1/8″ at a 90-degree angle and 1-5/8″ at a 45-degree angle. It features a universal 1-1/4 inch hole for easy cleaning.
3. Bosch GKT13-225L 6-1/2″ Plunge Track Saw Kit
Pros:
It almost never slows down or overheatsThe track is not dented by the sturdy connection mechanismThe dust port remains tight and in placeThe dust port remains tight and in placeSystem with a stable track
Cons:
Quite costlyIt’s not very good at cutting squares
Sebring Tip:
The Bosch GKT13-225L saw kit, which is similar to a Festool, combines the finest plunge action track saw characteristics. It has a quick speed and is simple to set up.
It is particularly effective in wood-based sheets, such as plywood and laminated particle boards. The Bosch GKT13-225L uses an easy-to-use plunge mechanism to produce accurate plunge cuts. A three-blade changing mechanism makes it simple to replace a blade.
4. Festool TS 55 REQ Plunge Cut Track Saw Kit
Pros:
Bevel capacity that can be adjustedFitted with an excellent dust portVariable speed dial is simple to operateSoft start mode is included in the triple-bearing motorProduces splinter-free, high-quality cuts
Cons:
The sheer amount of options takes some getting accustomed toLarger projects may need the use of additional guide rails
Sebring Tip:
Fortunately, both the Festool track guide and the saw remain securely in place. Plus, when not in use, the plunge cut design and riving knife retract the blade into a full-cover blade guard. Cleaning up the dust is also simple.
5. Kreg ACS2000 Adaptive Cutting Track Saw Kit
Pros:
Leaves a splinter-free, smooth finishIt’s ideal for putting the final touches on a project quickly.Simple and straightforward to useCutting depth is excellent
Cons:
The track connection screws are smaller than the rest of the saw’s screwsThere’s no place to put the wrench that came with itThe dust port must be emptied on a regular basis
Sebring Tip:
Its 6-1/2-inch blade can cut through plywood, hardwoods, and solid boards, among other materials. This model may be used on its own or in conjunction with the Project Table Kit for further benefits.
6. DEWALT DWS520CK Track Saw With 59 And 102-Inch Guide
Pros:
The blade guard on this track saw is intended to be low-profileAllows zero clearance cuttingThree-year limited warranty
Cons:
There are two tracks included, which are superfluous
Sebring Tip:
DeWALT is well-known for the high quality of its goods. This track saw kit is no exception, with a housing constructed of high-quality metals and impact-resistant polymers that can withstand the rigors of professional usage. You may find this useful, particularly if you’ll be utilizing it on the job as a professional.
7. WEN CT1065 6.5-Inch Plunge Cut Track Saw
Pros:
Reasonable pricingThe material being cut is well supported by a 6 5/8 inch baseIt runs nicely on track
Cons:
The levers and knobs are constructed of a lower-quality plastic
Sebring Tip:
This cheap track saw is intended for the DIY homeowner or casual carpenter. It has speeds that make blades operate effectively. Under no load, the motor can achieve a maximum RPM range of 5,500, which helps to compensate for the motor’s lower amp output.
What Is The Purpose Of A Track Saw?
Although a track saw resembles a circular saw track, it enables you to create cuts that a circular saw would not be capable of.
If you think it’s simply a fancy-looking circular saw, you’re mistaken. It’s much more. It’s a saw that can create cuts that would usually be done on a table saw or a panel saw.
A track saw’s primary function is to produce lengthy, precise rip cuts.
This is due to the fact that it has a slide or guide rail that enables it to glide smoothly and precisely on a straight path when cutting.
Because you may put it flat on the material and the blade will protrude from the bottom, diving into the material to produce the cut, it’s called a plunge-cut saw. You can’t do it with a circular saw.
You might ask, “Why should I buy a track saw when I already have a table saw and a circular saw?” Well, you should buy it since it allows you to create lengthy rip cuts more easily.
Unlike a table saw, you don’t have to bring the material to the saw to be cut; instead, the saw may come to the material.
That means you can rip-cut and break down exceptionally big boards that would be impossible to cut or handle with a table saw.
Things To Consider When Buying The Best Track Saw
Before purchasing a track saw, there are a few things to think about.
A basic purchasing guide may make a big impact when it comes to making purchases. I hope that this advice will make it simple for you to choose the best track saw.
Anti-kickback Mechanism
It’s one of the most crucial features of a DIY track saw. You may move the saw forward and backward on the track as you slide it along. Cutting backward, on the other hand, may be hazardous. This may result in a kickback effect.
The track saws include an anti-kickback feature to prevent such an unwelcome issue. It’s a small addition that has a big impact. On the saw, there may be a tiny key or knob that stops it from moving backward when sliding in a track.
Similarly, even if you pull it back by accident, you won’t be able to create the kickback problem.
Simple Adjustment Settings
A track saw requires many modifications. A track saw allows you to measure the required angle of your cut, as well as the depth of your cut, as well as linear measures.
You must manually adjust your saw to the necessary measurement. If the tool’s adjustment mechanism is complex, you’ll spend half of your time simply adjusting it. And it is something you do not want to happen.
As a result, it is critical that you choose a saw with basic settings and a simple adjustment mechanism.
Depth Capacity
It’s crucial to understand the plunge saw’s depth capability. The saw’s operating capability is determined by its depth capacity. Saws with a low penetration capacity will not perform like those with a greater capacity. The greater the cut depth, the better.
Various saws may have different depth scaling systems. Some are in imperial units, while others are in metric. It is preferable to choose the one with which you are most acquainted.
Different depths of cuts are required for different tasks. You should ensure that your saw offers a broad variety of functions.
Bevel Capacity
Track saws are capable of bevel cuts and provide a broad variety of angles from which to select. Both sides of these saws feature bevel locks. You may scale the angle on each side and lock the door on either side. Such measures provide the most precise results in each cut.
Track saw bevel capacity typically varies from a full 90 degrees angle to approximately 45 degrees. For various saws, this may vary somewhat.
After hitting the 45-degree angle limit on certain saws, it may deflect a second time to approximately 47-degree angle. Negative bevel capacity is also a possibility with such saws.
On Track Smooth Movement
A track saw’s ability to glide smoothly down the track is critical. If the saw can’t travel freely on the track, it won’t make clean cuts. The more friction it encounters while traveling, the worse the cuts it makes. Smooth cuts are ensured by smooth movement.
Most saws include plastic strips in their tracks to provide the greatest performance. This lowers the amount of friction created when sliding. The saw slides along with the cut thanks to the frictionless action, resulting in chip- and splinter-free cuts.
The Benefits Of Using The Best Track Saw
The track saw is the saw that ensures safe and precise cutting. If you’ve never used a saw before, we strongly advise you to get a track saw. When compared to other kinds of saws, this one has the simplest functionality.
The benefits of having a track saw are outlined for you, along with some little-known facts about the equipment you’re about to purchase.
Safe Cutting
Because the blade is only open in one section of the machine, the track saw offers all-around safety during cutting. The rest of the machine is encased in protective handling components. As a consequence, you won’t need to wear as much safety gear while cutting with this equipment.
Accurate Cuts
The fact that a track saw only cuts along the track is a huge benefit. It cuts perfectly and smoothly without any issues. The primary goal of this machine is to cut precise lines that go in the direction you choose.
No Experience Needed
Unlike other saws, which take considerable practice to master, operating a track saw efficiently is simple. Set the tracks and slowly move the saw over them to make the cut you want. To achieve a high-quality finish, you don’t need to learn how to balance or utilize various methods.
Sawdust Protection
Saws are notorious for producing a large amount of sawdust when in use. Inhaling sawdust may harm your health, and if it gets into your eye, it can blind you. When you use a track saw, though, the sawdust falls straight to the floor rather than flying into your eyes. This is due to the machine’s operation, which prevents the majority of sawdust from flying outdoors.
Angular Cuts
Making precise angle cuts using saws like electric saws or table saws is almost difficult. The procedure requires a high level of skill and understanding, and the chances of cutting smoothly are little to none.
This is where a track saw comes in handy since it allows you to customize the angle, depth, and direction in which you want to cut the item. After that, just move the saw over the track to get the desired cut.
Conclusion:
The Makita SP6000J1 Plunge Circular Saw Kit offers all of the features a professional track saw needs. A 55-inch track is included in this package, with extra tracks available if required. The saw, on the other hand, is where the kit truly shines. This plunge saw features a 12-amp motor, bevels ranging from -1 to 48 degrees (w/ positive stops at 0, 22.5, & 45 degrees), and a cutting depth of 2-3/16 inches. It also includes a depth-stop function that activates with the flip of a lever, allowing the operator to make a fast pass over the material while only cutting 1/16 of an inch deep. This gives the material a score and prevents splintering. Best of all, a dial on the handle allows users to change the speed between 2,000 and 5,200 RPM.
The Makita is an excellent saw that excels in all areas. An 8 1/4-inch blade might help it muscle through heavier materials, if there is one criticism.
To view our Amazon Associates Disclaimer, please click here.
The post 7 Best Track Saws [2021 Reviews] appeared first on Luxury Home Remodeling | Sebring Design Build.